Raspberry Pi 4 + XL6009 Buck Converter Snap Fit Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi 4 case with 4010 fan and XL6009 buck converter to use 12v fans
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit 1: snap-fit is not good right now, sorry for that. I'll try to learn a better design. Cad files are available for contribution.
A screwless case for Raspberry Pi 4 with a buck converter to use 12V fans.
The buck converter I used is the XL6009, as it can boost the voltage from 5v to 12v.
The 4010 fan doesn't need screws as it slides into place. Everything else is snap-fit.
Since I'm a Fusion newbie, I have attached the CAD files for anyone who wishes to improve it.
I printed in PETG using a 0,4 nozzle, 0,2 layer height, 15% infill, 4 wall loops, and 5 top and bottom layers.
