1 / 4
Seedling Planter Pot | Interlocking Hexagons | Easy Release System
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enlarged remix of Michael Conrads hexagon planters. With added release system, different heights and tighter fit.
- Rating
- 5 / 5
- Likes
- 428
- Downloads
- 741
- Makes
- 5
- Views
- 3,804
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hexagon styled seedling planters
- 3 heights to combine for visual esthetics or different plant needs.
- Easy to fill when connected due to reduced spill over.
- Careful release by gently pushing up the bottom inlay.
- 13 pieces fit one standard 38x24cm planter dish.
- No supports or brim needed.
Print advise
The tolerances are supposed to be very tight to guarantee friction fit.
Therefore, three versions with different spacing/tolerances between the joints are available.
- Print the test files before starting a lengthy print.
I'd suggest printing the 0.1mm spacing version first. In case 0.1mm is too tight, choose the 0.2mm version. Only if 0.1mm feels loose, try the super tight 0.05mm version. - Choose the model files according to your successful test print from the folder named by the amount of spacing between the joints.
Use PETG, ABS or any other weathering resistant filament