Armstrong Stand for soldering V2.2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Armstrong Stand. Soldering stand and spool holder.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 52
- Makes
- 0
- Views
- 413
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Armstrong Stand.
Soldering stand and spool holder.
I have three stand options:
- A regular Stand has 70 mm from the base to the crossbar (19 mm in diameter). For some tasks, this height is not always convenient.
- A miniStand has 43 mm from the base to the crossbar (19 mm in diameter).
- A StoutStand has 57 mm from the base to the crossbar and increased diameter up to 23mm. I specially added this option because I have a second, larger solder spool.
For complete assembly you need:
5 x screws 3*12
2 x crocodile clips 35 mm
4 x heat shrink d=3.5 mm
Heat shrink is needed to prevent scratching components and microcircuits.
Printing:
1 x Stand or miniStand
1 x MainMount
2 x Arm
2 x CrocodileMount V1 or V2…
Important
- The main 3MF files contain all the parts of the project, so you need to delete the parts you don’t need.
- Before printing you can use a 3MF file with a gap test. Only if you use a 35mm crocodile clip.
- When using my 3MF file, be sure to change your printer, filament, and print settings if necessary.
- On the new photos, I used Ironing when printing. It is not necessary, so it is turned off in the 3MF files.
Updates:
20.07.2024 - V1.1
- Changed orientation of parts for easy printing. Added .3MF file.
23.08.2024 - V2
- Added new miniStand. Experience of use has shown that a lower stand is needed. New miniStand is 27mm lower.
- Added new .3MF files for both stands.
- The length of the arms was also increased by 5.5 mm.
- CrocodileMount_V2 has been replaced. The new version includes a vertical crocodile clip mount. Now there are 4 versions of this mount, allowing you to select the one with the smallest gap to fix the clip tightly. I have also included a 3MF file with a test model.
- Reduced gap between Stand (miniStand) and MainMount for tight fit.
- Updated photos added.
- Description updated.
23.08.2024 - V2.1
- Added new StoutStand and 3MF file for it.
- Photos added.
04.09.2024 - V2.2
- Heat shrink added.
- Photos added.
Thank you so much for likes and downloads! I continue to work on my projects and useful things. If you find any shortcomings in my work, please leave a comment.
(The Armstrong Stand V1 video)