1 / 9
Elektron Model:Samples Stand with Power bank Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes the device portable and adds a comfortable angle to it.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 56
- Makes
- 0
- Views
- 580
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
This stand tilts the device for a more comfortable angle. It has room for a sizable power bank for on-the-go use. A USB-to-2.1 barrel jack cable is required for the power delivery. (I don't have it yet.) The design incorporates indents to neatly store excess headphone cable around the battery compartment. I printed it with Signal White Prusament PETG without support.
Additional components I used:
- 4pcs M3 x 4mm heat set inserts (nuts can be used as well) - I inserted them into the holes of the battery compartment with a soldering iron.
- 4pcs M3 x 14mm screws - mount the left and right legs to the battery compartment inserts
- 4pcs 2.9 x 19mm tapping screws - mount the stand to the bottom of the device (the original screws in the device are too short for this)
- 2pcs 12mm wide velcro tapes - holds the power bank in place
- 4pcs 9mm diameter rubber feet - added to the bottom to prevent slipping