MK4 / MMU3 / PTFE - Y - connector (fusion model included)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
an easy to install and use Y Connector to use the MK4 w/wo MMU3 without changing anything on the PTFE connections.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 214
- Makes
- 4
- Views
- 1,297
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
I encountered regularly the annoying problem that i had to disconnect the MMU3 from the extruder and connect an other PTFE tube to use the printer without MMU3. now i do not have to do that anymore :)
most of the other connectors are pretty “long” and become problematic when the printer is used in an enclosure and the nextruder is right at the maximum height. the PTFE tubes are then bend into sharp angles which are not optimal.
this PTFE - Y -Adapter is designed to be screwed directly into the Nextruder (M5x0,8mm). The MMU is connected with M5 fitting thats delivered with the MK4 printer. the additional PTFE 4mm tube for printing without MMU3 is directly inserted.
this way the problem with the missing space above the printer becomes less problematic
this version works, but it is not perfect, so feedback is very welcome.
Also the fusion model is included
UPDATE 2025 February 13
print recommodations:
PETG
0,05mm
6 perimeters
support on bed only
5mm brim
max. 140 mm/s printspeed !
a big thank goes to ToDamLazy + Papaja for their feedback. based on that i could made a substantial update