1 / 2
Paulchen Panther hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eis Pink Grapefruit und Gin
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 29
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kexcelled White Transmission Distance: 4
PLA Geeetech New Pink Transmission Distance: 6.4
PLA Elegoo Black Transmission Distance: 0.3
Swap Instructions:
Start with White
At layer #8 (0.72mm) swap to New Pink
At layer #19 (1.6mm) swap to Black for the rest.
Do not change the Z height but you can change the X and Y by the same percentage.