1 / 2
Drip Guard IKEA ÄLMAREN/KILSVIKEN
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drip Guard IKEA ÄLMAREN/KILSVIKEN
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This splash/drip guard is designed for the IKEA KILSVIKEN built-in sink and the ÄLMAREN mixer tap.
I found it frustrating that with wet hands there was always so much dripping around the tap when you turned the lever. The faucet is 34.5mm from the sink, but you can adjust the distance between them in sketch 1 of the f3d file. The width can be adjusted in extrusion 5.
I printed it with the flat side down. The whole thing is then simply clipped onto the edge of the sink.