Support pour casque audio /Headphone holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: SBD-PC_0.2mm_PLA_MK3S_9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Support pour casque audio basé sur le logo de beyerdynamic /Headphone holder based on the beyerdynamic logo
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 66
- Makes
- 0
- Views
- 820
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
3 versions du support :
- Simple
- Avec attaches câble et encoches format USB type C
- Avec attaches câble et encoches format USB type C bicolor
2 coussins différents.
Le coussin est à imprimer en FLEX/TPU/TPE de préférence
Le mors de la vis de serrage est monté sur une rotule pour éviter le décalage lors du serrage.
Trois trous sont prévus sous le support pour renforcer celui-ci avec des tiges de 3mm. "optionnel".
La pièce SBD-TypeC.STEP existe en version large SBD-TypeCLarge.STEP si votre connecteur USB typeC ne rentre pas dans la version classique.
EN
3 holder versions :
- Simple
- With cable ties and USB type C slots
- With cable ties and nUSB type C slots bicolor
2 different cushions.
The cushion should preferably be printed in FLEX/TPU/TPE.
The clamping screw jaw is mounted on a ball-and-socket joint to prevent shifting during clamping.
Three holes are provided under the support to reinforce it with 3mm rods. “optional”.
SBD-TypeC.STEP is available in a wide version, SBD-TypeCLarge.STEP, if your USBN typeC connector doesn't fit into the classic version.
Translated with DeepL.com (free version)