1 / 6
Conical v60 #2 coffee filter holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic box for v60 #2 coffee paper filters
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 48
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Inspired by poom3d's Conical #4 Size Coffee Filter Holder, i've created this one to hold my Hario v60 #2 paper filters.
I used 1,5mm wall thickness and made it 42mm wide inside to hold 100 paper filters.
Print notes:
- Nothing fancy here, print it upright without supports
- I used 0.2mm layers because i was too lazy to change it when printing
- 2 side walls and 15% infill
- Tested with PLA and PETG and worked fine :)
- Have fun printing :)
On the photos i've used some (a bit old) Voolt3d PLA
21-07-2024 - Update: Just made a narrower version with 20mm of internal room to fit 100 filters snugglier so they won't go flying with the wind and called it v2 and for no particular reason, made the walls from 1,5mm to 2mm on the v2