1 / 2
Kegerator Collar Corner Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corner bracket to simplify building the collar for a keezer/kegerator with 2X6 lumber
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 54
- Makes
- 0
- Views
- 474
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Corner bracket to simplify building the collar for a keezer/kegerator with 2X6 lumber. Designed to allow a little bit of slop in the lumber/saw cuts.
This is intended to be a structural part, I recommend the following settings:
- PETG, PLA, or ABS/ASA
- .3mm layers or larger if you have a larger nozzle
- 3 perimeters
- 20% infill
The holes are sized for ¼" fasteners, lag bolts for the lumber and self-tapping screws for the connection to the chest freezer.
Maybe a solution looking for a problem, but hey, it's fun to print things.