Hands up, Otter! Hueforge wall art
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge print of an otter with its hands in the air like it just don't care.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 0
- Views
- 356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
A friend wanted an otter print for her niece, and there is a shocking lack of quality otter content here. This Hueforge print is very easy to print. it just requires black, gray, and white filament.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x176.6mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #16 (1.36mm) swap to White for the rest.