1 / 4
Parkside pegboard filament sample holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Be careful if you intend on printing the stick as well, it cannot be printed vertically (too much wobble), as such it must be printed horizontally. When doing so, I recommend printing at a low speed with thinner layers. Around 0.16mm is good. If you have the first layer thickness a bit higher, you may need to do a bit of post processing with a deburring tool to round it off.
This is designed to fit around this.