Badminton String Reel Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular Badminton String Reel Holder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 57
- Makes
- 0
- Views
- 758
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This design is based on an idea from a colleague, ratchet stringer. His original idea can be found here: https://www.thingiverse.com/thing:6494580 .
This is the design for a modular Badminton String Reel organizer. You need to start with the 27.5 mm pieces. At the end, you need to use one 17.5 mm piece and one EndPiece.
The width is based on YONEX Badminton string reels.
You can add as many parts as you want. The parts are connected with a 5 mm threaded rod, with a regular bolt at the beginning and a special nut at the end (M5 DIN 546). For a 10 slot wide holder you need 2 threaded rods from around 298mm each.
I printed the parts in PETG, but I think other materials will also work. I printed the parts with 15% infill.
Happy stringing!
I also added a 37.5 mm wide piece for Ashaway strings (but I have not printed one).
---