Hülse für Laufrolle eines Roba Laufgitter (Playpen)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.18 – €0.22 net (excluding VAT)
For file: Laufbett_Hulse v5_0.4n_0.2mm_PLA_MINIIS_16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.20 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 16.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Die Hülse einer der Rollen vom Roba Laufgitter war ausgeleiert, sodass sich das Rad nicht mehr gedreht hat.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Die Hülse einer der Rollen vom Roba Laufgitter war ausgeleiert, sodass sich das Rad nicht mehr gedreht hat. Aussendurchmesser der Hülse 12mm, innen 8mm. Ich habe es mit PLA gedruckt, sodass es ein bisschen geschrumpft ist und entsprechend die Toleranzen angepasst.
-----------
The sleeve of one of the wheels on the Roba playpen was worn out so that the wheel no longer rotated. The outer diameter of the sleeve was 12mm, the inner diameter was 8mm. I printed it with PLA so that it shrank a little and adjusted the tolerances accordingly.