1 / 4
GL.iNet Beryl AX (GL-MT3000) Lightweight Carrying Case — image 1
1 / 4

GL.iNet Beryl AX (GL-MT3000) Lightweight Carrying Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A vase mode case for the GL.iNet Beryl AX router with minimal added weight and size.

Rating
4.5 / 5
Likes
18
Downloads
98
Makes
2
Views
1,382
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a lightweight case I created to safely carry the GL.iNet Beryl AX (GL-MT3000) router in my luggage. It only weighs 21 grams and is printed in vase mode. (The router weighs 198g without any accessories.)

 

Printing

  • Print 1 body + 1 cap
  • Vase mode
  • 0.2mm layer height
  • 0.5mm wall
  • 0.6mm bottom shell (3 layers)

 

Additional printing instructions

As mentioned above, you must print it in vase mode (a.k.a., “spiral” or “corkscrew” mode). If you're not sure how to do that, just do a quick Google search. All modern slicers should support this feature.

I printed the body using transparent PETG to be able to quickly tell what's inside. The cap was printed in black PETG. Other materials should work as well, although PLA might be a little too brittle.

I've found the 0.5mm wall to be more than sufficient for my use case, but if you want the case to be more robust, you can scale both the body and the cap in the X and Y directions a little bit and use a thicker wall. I've had success with up to 1mm wall using a 0.4mm nozzle but have not tested a thicker wall.

If you encounter printing quality issues, try slowing it down.