1 / 2
Saddles for pipe insulation
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket that holds a 15A pipe covered with insulation.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 42
- Makes
- 1
- Views
- 209
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
- It became necessary to repair water pipes.
- I needed some plumbing saddles, and I needed them to be easy to install and release.
- Ender3V3, 0.3 layer height, 35% cross hatch infill, PETG, about 1H print time
- The outer diameter of the insulation material of the 15A pipe was 60MM.
- The diameter of the hole is 5 pi, and the spacing between the holes is 90MM.
- Anyone who needs it can use it.