1 / 5
DJControl Starlight Knobs, Faders and Encoders
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collection of files to print custom knobs, faders and encoders for the DJControl Starlight
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 34
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Technical information for all model files:
- Nozzle size: 0.4 mm, no Input shaper
- Layer height: 0.2 mm (Quality)
- Materials used: PLA/PETG
- Printer used for prototyping: Prusa MK4
- Type of bed used for prototyping: Textured
Notes:
- All printers have different tolerances, we aimed to make a set of files that works on the maximum number of printers but your mileage may vary.
- Not compatible with other Hercules controllers except the DJControl Mix.
Safety tips:
- IMPORTANT: BE GENTLE when removing and putting caps back on.
- You may need to use a small plastic card or tool to lever them off and remove your original caps. A bit of lube may help the installation.
- Do not perform any lateral movement with the caps under any circumstances.
- Customize at your own risk!
