20° Slim Grip for Mosquito Open Beta 2 & MK1 Airsoft Kits
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slimmer grip at about 20° for HYBRID ARMORY Mosquito Open Beta V2 and the Mosquito MK1 Airsoft Kits.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 303
- Makes
- 4
- Views
- 1,097
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
IMPORTANT: Make sure the black wire is seated properly into the groove on the bottom of the motor cage. Otherwise, you WILL pinch the wire when installing the grip.
Update 2025-09-26: Added versions for the Mosquito MK1 release. The MK1 changed some dimensions, rendering the old design incompatible. I also added optional trigger guards that mesh better with the contours of my grip. The modded trigger guard does not need supports, the sensor guard version needs supports everywhere.
I've also added versions of the trigger guard that should allow you to install Open Beta 2 grips onto your MK1.
Update 2024-12-01: Added 3MF files for PrusaSlicer 2.9.0 Alpha or newer. These have fuzzy skin modifier meshes. Older versions of PrusaSlicer have issues with modifier meshed cutting the model. Adjust your fuzzy skin setting to your liking for best effect.
Can be printed without supports, but you may enable organic/tree supports for the depicted regions for a cleaner finish.
This is based on the Newgriptest.stl posted in the HYRBID ARMORY Discord server.
It has a 20 degree grip angle, which more closely follows the V3 motor housing and allows for a slimmer grip.
The edges are much rounder than Newgriptest.stl and fit my hand better.
Type B has a cut for aethetic purposes, all my friends say it is less comfortable than Type A.