Prusa XL Nozzle Scrubber / Brush
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.70 – €0.85 net (excluding VAT)
For file: Brush_Here v8_0.4n_0.2mm_PETG,PETG,PETG_XLIS_50m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.78 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 50.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cleans the nozzle every time when it gets parked. Great for Tool changer.
- Rating
- 4.846 / 5
- Likes
- 59
- Downloads
- 394
- Makes
- 15
- Views
- 1,891
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Here's my design of a Prusa XL Nozzle Scrubber / Brush.
There are tools for correct assembly, brush holder and filament collector.
Drawn in Fusion 360
Print instructions
¤ Remenber to use tree support on Brush holder
¤ Use .3mf or .gcode for presliced settings.
¤ Print in Prusament PEGT.
¤ Tool 1 → Prusament PETG Jet Black
¤ Tool 4 → Prusament PETG Lipstick Red
¤ Tool 5 → Prusament PETG Signal White
The Brass holder is design for those brush on amazon.de
