Shipping Container Terrain Print-In-Place Working Doors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shipping container terrain written in cadquery. The container is printed in one piece with two working hinges and doors.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 263
- Makes
- 1
- Views
- 1,088
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution
Shipping container terrain written in cadquery.
The container is printed in one piece with two working hinges and doors.
I made two different variants one with greebles and the other plain.
---
For more details and part specs go here:
https://miniforall.com/shippingcontainer
This is an open source project that you can customize:
https://github.com/medicationforall/cqportal
You can support this project and other projects I'm working on at patreon:
https://www.patreon.com/miniforall
---
### Greebled Container
* Length - 150mm
* Width - 75mm
* Height - 75mm
* Weight - 117grams
* Print Time - 16 hours 50 minutes
* Layer Height - 0.2mm
* Infill - 10%
* No Supports
* to fit the model on 200x200mm print bed, I printed the model with the doors up.
* I print with a brim of about 3 lines because the closed door contact is very small on the base
### Plain Container
* Length - 150mm
* Width - 75mm
* Height - 75mm
* Weight - 115grams
* Print Time - 15 hours 18 minutes
* Layer Height - 0.2mm
* Infill - 10%
* No Supports
* To fit the model on 200x200mm print bed, I printed the model with the doors up.
* I print with a brim of about 3 lines because the closed door contact is very small on the base