Dog Poop Bag Holder (fast print)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.16 – €0.20 net (excluding VAT)
For file: holder_0.4n_0.3mm_PLA_MINIIS_8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.18 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 8.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple holder attached to the leash for used bags, just slip the bag into either slot and the knot will hold it!
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 297
- Makes
- 6
- Views
- 831
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
A simple holder attached to the leash for used bags, just slip the bag into either slot and the knot will hold it!
Can be used for multiple bags and as a bonus if you turn it upside down it looks like a dog :D
10% rectiliner infill and 3 perimeters is plenty strong enough and prints in around 10m.
Have included my speed gcode version (0.3 layer height and other tweaked settings) as well as the STL.