1 / 2
Bath and Body Works handsoap cradle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The bottle is top-heavy and is very tippy. This print fixes the issue by adding weight to the bottom half.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 59
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Add a pause at the beginning of Layer 278 in your slicer like shown below:
Note the layer number will be different if your layer height is different from 0.2 mm.
This will allow you to add weight before the cavity is closed off. I have lots of Phillips head screws that I don't use so that's what I put in the model.
Recommended print settings
- 0.2 mm layer height
- Top shell layer: 5 or more