1 / 2
Lifting Scoop For HP Otto
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A servo powered lifting sccop modification for HP Otto
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 35
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used PLA with 20% infil 0.2mm
The lower arm assembly needs supports.
2 copies of the upper arm are required. The end with an 'F' embossed on it pushes into the scoop
If you have line followers, you need to remove the securing screw from the line follower, for the servo to lie flat. The servo will keep the line follower in place.