Eevee/Flareon Evolution Hueforge Art
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Hueforge STL of Eevee/Flareon Artwork.
- Rating
- 5 / 5
- Likes
- 128
- Downloads
- 273
- Makes
- 3
- Views
- 1,335
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Hueforge STL of an Eevee/Flareon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 139.25x215.61mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #15 (1.28mm) swap to Pure Yellow
At layer #20 (1.68mm) swap to White for the rest.