Prusabot ESP32 cameramount for Original Prusa XL enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusabot ESP32 cameramount for Original Prusa XL enclosure
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 88
- Makes
- 2
- Views
- 1,289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Posted with prior aproval of @jorge_rui
Instructions;
1) Print the front plate from the original Prusabot page (paid model) and print both parts from this listing
2) place the nuts inside the mount and screw both halves together, the M3x12 screw sets the tension of the mechanism.
3) Mount the PRUSABOT to the left-front of the enclosure with M3x8 bolts. There will be 3 holes in the sheet metal. Use the top and bottom one. While mounting, make sure the clamps are on the bottom side (otherwise the cable will come out on the bottom)
4) Slide in the PRUSABOT front with the ESP32-CAM module in place
5) Connect the USB to the module and route it via the premade cabletie-holes in the enclosure to the left-bottom corner (where the fan and LED cables exit as well). Plug the other end of the USB to a power source.
And that's it!! now configure the camera following the guides listed on Github and the Prusa blog