Universal Slim Steam Deck Dock
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.12 – €1.37 net (excluding VAT)
For file: MB_SteamDeckDock_0.4n_0.2mm_PLA_MINI_1h17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.25 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.28 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Universal, low material using Steam Deck Dock for your Deck and thin dock/hub/powerbank.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
I use a slim, but wide notebook docking station with my Steam Deck, and wanted to create a low material-need, but versatile docking solution for the assembly.
For the default setup, you need 2 pieces of the model (as seen in the .3mf and the .bgcode), but you could also set the width of a single piece to 5cm or so, and print a single, wide dock. Actually, that was my original plan, but I realized that I could save filament and have a more universal solution by having 2 thinner pieces (feet) for the Deck and the dock.
The front cutout fits the Steam Deck, while the rear cutout of the model fits docking stations, hubs, powerbanks, etc. up to 10mm wide (that is the width of the bottom part of the rear slot). I recommend printing the 2 piece version, as you can freely move the pieces to fit your Deck and the device you want to dock in the rear slot.
Printing
Default PrusaSlicer settings are fine (2 perimeters, 15% infill, 0.20mm layer height). Print in an orientation laid on the side, as seen in the uploaded files.