Classic Mini KAD Shifter Debris Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This debris shield fits snugly around the KAD quick shift kit and prevent debris from getting into the shift boot.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 78
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This gasket/shield fits around the blue collar of the KAD short shifter for a classic Mini and is installed between the gaiter/gaiter ring assembly and the floor. I intentionally left off holes so you can make your own to fit your particular car. Be sure to print this in TPU or flexible filament as it will need to flex to conform to the floor tunnel. When installed, it should have the flat side up and hole toward the rear of the car and under the KAD grease fitting. The stepped side should be facing down so it will fit around the lip of the floor tunnel.