1 / 5
Cup Riser Stand for De'Longhi Magnifica S
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
This is a cup riser stand the De'Longhi Magnifica S espresso machine I made as our usual are small and sited a bit too low for our liking even with the “machine's nozzles” set to the lowest position.
This is a 20 mm riser with 5 mm post to fit in on the tray so it doesn't move from the machine's vibration.
Dimensions: 75 × 75 × 25 mm
You could also use your slicer's size tool to change the height (this will change the posts' height, so maybe you should probably split the object into 2 then change the height)
Printed example using Prusament PETG Transparent with BambuLab X1C
KO#8