Chlazení střídače Solax X3 hybrid G4 / Solax X3 hybrid G4 inverter cooling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chlazení střídače Solax X3 hybrid G4 za pomoci tří ventilátorů a termostatu z Číny / Solax X3 hybrid G4 cooling solution
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 319
- Makes
- 7
- Views
- 1,867
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Jednoduché a nenáročné řešení chlazení střídače Solax X3 hybrid G4, které za pomoci tří ventilátorů a termostatu W1209 umožní vyšší průtok vzduchu přes žebra střídače.
Držák rámu je upevněn za neosazené průchodky CAN1/2 a DRM/OFF. Na tento držák je nasunut rám s ventilátory. Celý systém využívá napájení 12 V z externího zdroje. Spotřeba celého systému při běhu ventilátorů je cca. 7 W.
STL modely je nutné před slicováním rozdělit na objekty.
Použitý materiál:
- 3 ks ventilátorů 8010 na 12 V - např. https://www.aliexpress.com/item/1005006654346774.html
- Termostat W1209 - např. https://www.aliexpress.com/item/33015064548.html
- Napájecí zdroj 12 V, 1 A - např. https://www.aliexpress.com/item/1005006425424735.html
- Konektor 5,5 x 2,1 mm do panelu - např. https://www.gme.cz/v/1498555/ds-026b-dc-konektor-55-21
- Konektory na kabel 5,5 x 2,1 mm (M + F) - např. https://www.gme.cz/v/1499772/k36722a-dc-konektor-55-21 , https://www.gme.cz/v/1499526/np-119b-en-dc-konektor-55-21
- Kablík dvoužilový
- Cuprextit na výrobu plošných spojů
- Šroubky
Na vyžádání mohu dodat i soubory plošných spojů.
AKTUALIZACE: přidán upravený držák rámu pro navlečení přes průchodky, takže není nutné je celé odmontovávat. Vizte model „Chlazeni FVE - drzak ramu - upraveny“.
-----
A simple and undemanding solution for cooling the Solax X3 hybrid G4 inverter, which with the help of three fans and the W1209 thermostat will allow a higher air flow through the inverter ribs.
The frame holder is held by the unused bushings CAN1/2 and DRM/OFF. A frame with fans is pushed onto this holder. The entire system uses 12 V power from an external source. The consumption of the entire system when the fans are running is approx. 7 W.
STL models must be splitted into objects before slicing.
Used material:
- 3 pcs fan 8010 12 V - e.g. https://www.aliexpress.com/item/1005006654346774.html
- Thermostat W1209 - e.g. https://www.aliexpress.com/item/33015064548.html
- Power supply 12 V, 1 A - e.g. https://www.aliexpress.com/item/1005006425424735.html
- 5.5 x 2.1 mm connector to the panel - e.g. https://www.gme.cz/v/1498555/ds-026b-dc-konektor-55-21
- Connectors for cable 5.5 x 2.1 mm (M + F) - e.g. https://www.gme.cz/v/1499772/k36722a-dc-konektor-55-21 , https://www.gme.cz/v/1499526/np-119b-en-dc-konektor-55-21
- Two-core cable
- Cuprextite for PCB
- Bolts
I can also send you files for producing PCB if needed.
UPDATE: added modified frame holder for threading through grommets, so it is not necessary to dismantle them completely. See model "Chlazeni FVE - drzak ramu - upraveny".