ratgdo v2.53i case box enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Simple box for housing ratgdo v2.53i. The lid is designed for the buttons to protrude above the surface of the top. If you feel like concealing them - raise the wall by another 5mm in the included Fusion 360 file.
- The top is friction-fit, but can use M3x14 Socket Head Cap screws for a more secure fit.
https://www.amazon.com/gp/product/B09WRF265M/ has a nice assortment
- Prints without supports. Optionally - use supports on 'build plate only' for the bolt openings.
- Use 3M velcro tape or a double-sided tape for mounting or modify the model to add mounts of your own
https://www.amazon.com/gp/product/B00IGIUP9O/
I'm using this for a dry-contact setup in conjunction with my junction box:
https://www.printables.com/model/954955-holder-mount-parametric-for-lever-wire-connector-2
The limit switches are mounted on a custom 3D printed bracket using a "boom" scavenged from a broken window screen.
https://www.amazon.com/dp/B0B96R6FWT