1 / 4
Riden RK6006 minimal case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Riden RK6006 for use without fan, minimal size
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 68
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Printing Instructions:
- Layer Height: 0.2 mm for standard printing.
- Line Width: 0.4 mm.
- For Best Appearance: Use a layer height of 0.16 mm.
- * Grill.stl: should be printed without top and bottom layers, with 30% honeycomb infill pattern.
- Material: Use any high-temperature filament; do not print using PLA filament.
Place the grid into the cutout in the top and bottom lids, add glue to fix it. Also for assembly you will need 4 pcs of M2.5*8 screws.