Kennel Warmer Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows veterinary clinics to connect a convection air warmer to a pet heating blanket through a kennel door.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 138
- Makes
- 1
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
This adapter was designed to fit a Smiths "Level 1 Equator" (model number EQ-5000) convective warming unit. https://jsmedequipment.com/products/smiths-medical-level-1-eq-5000-equator-convective-warming-unit-1
It will probably fit other warming units with the same size air hose.
It is used to connect the warming unit to a pet warming blanket, similar to these. https://petprosupplyco.com/products/dre-washable-warming-blankets-pack-of-3
After hanging the adapter on a kennel, the warming blanket is tied to the adapter on the inside, which holds the adapter in place. Then the hose from the warming unit is connected to the adapter on the outside.
The photo of the white adapter shows the actual model. The photo of the rainbow adapter is of the prototype (I beefed up the hooks a little after seeing how the prototype hung).
Update
Added the mating adapter which hangs on the inside. This just makes it easier to tie the warming blanket to the adapter.
Note the supports under the latch. These might not be necessary, but they are cheap insurance (and easily removed).
Print Settings
Printer Brand: Prusa
Printer: i3 MK4
Rafts: No
Supports: No
Resolution: 0.25
Infill: 15%
Filament: Prusament PETG Signal White