Captured ManyCubes (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.48 – €4.25 net (excluding VAT)
For file: 6_minus3_inside_ManyCubes with supports_0.4n_0.15mm_PLA_MK4IS_4h56m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.87 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 4.94 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Make one ManyCube inside another that is 3 smaller.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
This novel curiosity rattles when you shake it. It consists of 2 separate matrix of cubes with one printed inside the other. The smaller matrix is -3 the size of the larger matrix. The smaller matrix is not attached to the larger matrix. This is a uniquely 3D printed structure; it would be very hard to make without using 3D printing.
The printed Captured Cubes in the photo is size 6. I've provided stl files for size 10, 6, 5, and 4, but you can make the size you want with the OpenSCAD source file.
Removing the supports for the internal cube is a bit tedious. I found that my manual supports are easier to remove than the supports that are automatically generated. The OpenSCAD program will generate models with or without manual supports. If you choose to use automatically generated supports, check the boxes for “build plate only” and “don't support bridges”.
See: https://www.printables.com/model/188695-parametric-many-cubes-scad