1 / 2
Irwin Marples chisel tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tray for a set of Irwin Marples chisel set IRHT16401
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v2.0
I made a tray to hold this set of chisels in my toolbox. The chisels are sharp so they need to be under control.
The tray is too large to fit in most printers, so I broke it into two parts that fit together with a sliding dovetail. Ideally these can be printed out of ASA or ABS and glued together permanently with solvent glue. Alternatively, use PETG or PLA and some CA glue.
You will need probably need to enable supports to get the sliding dovetail to print properly.