1 / 3
Cable Tray Mount Ratrig Vcore 4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable tray mount to run cable front to back on the bottom of a Ratrig vcore 4.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 66
- Makes
- 1
- Views
- 796
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is bracket to mount a cable tray created using Shaun577's parametric cable tray. When mounted, it will provide a cable tray to pass cables from the front to the back of a Ratrig vcore 4.0. I have included a cable tray generated by the parametric model for the vcore 400. The tray is slightly modified on each end to allow for more play as it is installed. The cable tray is held between up high and out of the way.
- The cable tray attaches to the bracket with M5 bolts and heat set inserts.
- The bracket mounts to the 3030 extrusion with M6 bolts and t nuts.