1 / 6
HDPlex 500W PSU Adapter for Jonsbo N3 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for HDPlex 500W PSU to be used in N3 Case
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 826
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
PSU Adapter for HDPlex ATX 500W PSU. The adapter raises the PSU to allow clearance for the front IO daughterboard and certain motherboards with plugs coming out of the side. Uses 4x M3x8mm bolts to mount to the PSU because I don't have M2.5 bolts.
The rear mount on the output side of the PSU shows in the assembly picture is in the wrong direction, just rotate it by 180 when installing to avoid interference with the front IO board.