Lodos Tramp 3 replacement handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
First defect after 40 years, … broken handle.
For better strength, this handle is designed for printing in slant position. So supports is necessary.
2 versions:
A) The grip is attached to the handle with a screw and lock nut.
You need screw M4x20 (cylindrical Allen head) and M4 lock nut (or standard nut with thread glue), because the grip must rotate freely.
B) The grip is attached to the handle with thorn glued on grip
So you need only two drops of CA glue for join grip and thorn.
Print settings: (for both of versions)
Nozzle: 0.4mm
Material: PETG or better, I used PETG Carbon Fiber (black) and ASA (blue)
Layer height: 0.15mm
Perimeters: 4 (for handle), 3 (grip and thorn)
Infill: 25 percent (full infill for thorn)
brim and supports: YES (only for handle)
notes:
- every STL is oriented for print.
- for reduce supports on “A_Grip” the hole for screw is blinded, so use the knife to open it.
- If you want use original grip, print only “B_Handle”. This model is compatible.