1 / 2
H. R. Giger Necronomicon hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.3
PLA Anycubic dark grey Transmission Distance: 3.2
PLA Elegoo grey Transmission Distance: 3.6
PLA Max CC3D BoneWhite Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to dark grey
At layer #15 (1.28mm) swap to grey
At layer #21 (1.76mm) swap to BoneWhite for the rest.