Vasemode Trashcan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a basic trashcan 🗑 for your desk which is 100% designed for vase mode and .6mm nozzles.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 370
- Makes
- 1
- Views
- 933
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
This small desk trashcan was designed to be printed in vase mode. The model has a size of 204x204x250mm and should fit on most 3D printers.
Important⚠:
The model must be printed with a .6mm nozzle. Other nozzle sizes will not work cause of the way the model was designed. For the same reason, the model also can not be resized.
Print setup:
To print the model, you have to modify your slicer settings. The following settings are for PrusaSlicer; I couldn't get this to work in Cura.
- Layer height: .3mm
- First Layer height: .35mm
- Layer height limits:
- min: .3mm
- max: .3mm
- Spiral vase: yes
- Infill: 0%
- Perimeters: 1
- Bottom layers: 8
- Top layers: 0
- Extrusion width: .6mm
- Default
- First layer
- Perimeters
- External perimeters
- Slice gap closing radius: 0mm
- Extrusion multiplier: 1.03
The model works great in PLA but can also be printed in PETG. For PETG I would recommend to set the Extrusion multiplier a bit higher.
Happy printing 😎