1 / 4
Mewtwo_hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #12 (1.04mm) swap to Scarlet Red
At layer #18 (1.52mm) swap to Lilac Purple
At layer #25 (2.08mm) swap to Lemon Yellow for the rest.