Euro-Style Pneumatic Tool Dust Cap (PETG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dust cap for air tools using the NW 7.2 quick connect couplings common in Europe.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 64
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dust cap fitting the European I.D. 7.2 quick couplings for air tools and hoses (Schnellkupplung or Werkstattkupplung for my fellow German users). The couplings have a nominal outer diameter of 10mm at the tip, though actual sizes vary. I tested the fit with three tools I have available and the cap fits them all (some tighter, some more loose).
Print it in PETG at 0.2mm layer height. I recommend getting it off the bed while still warm, it's just a bit easier that way.
If you want to adjust the sizes, you can use the attached step file or open the model at Onshape.