Pencil holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.78 – €5.84 net (excluding VAT)
For file: Stiftebecher v6_0.4n_0.2mm_PLA_MK4IS_3h56m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.31 excluding VAT (range midpoint).
- Weight reported by the author
- 95 g
- Print time reported by the author
- 3.94 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This minimalistic pencil holder not only holds pencils but also uses the negative space as storage.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 78
- Makes
- 1
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Update (18.08.2024): In version v6 I have extended the bottom so that items in the “negative space” don't fall out when the pencil holder is lifted. I decreased the height of the object by 1 cm and it measures now 7 cm.
-------------------------------------------------------------------------------------------------------------
This print does neither require support nor MMU. With the given settings the height is 8 cm, its outer diameter is also 8 cm. To keep it sturdy, I made the walls and the bottom 2 mm strong. Infill: 20%. (10-15% would be more than enough though.) If you download the bgcode (with these exact settings), the printing time is 4h30 min.
This pencil holder consists of one big compartment in the center and eight smaller outer compartments with a diameter of 15 mm each. The negative space offers more options for pencils or some other “flat” things not exceeding 8 mm like rulers or post-its.
I would be very grateful for any constructive feedback and/or ideas for improvement. Photos of your own prints highly appreciated! :-)