1 / 8
DIY Servo Tester (for +180deg Servos!!!)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Servo Tester is 3D Printed! Now you can test any of your 5V Servos even those with range of motion >180deg!!!
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 91
- Makes
- 0
- Views
- 540
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Below I have provided the stl files and ready g-code files tailor-made for Prusa MK4!
Print Settings:
- Nozzle: 0.4mm
- Layer Height: 0.2mm
- Infill: 60%
- Perimeters: 3
- No brim or Raft
- Use Supports (Case.stl, Lid.stl, Knob.stl)
- Don't Use Supports (Separator.stl, Seamer.stl)
More Details for this project are followed with BOM list, code, 30 steps only building guide and electrical schematics on my GitHub Repository(here)
Open-Source Main Arduino Code here!
Electrical Schematic here!
BOM and Build Guide here!
Also my OnShape CAD Document here!