Doctor Doom Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Imagen generada por IA de Doctor Doom de Marvel hecha una lamina de hueforge.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 55
- Makes
- 0
- Views
- 822
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled Dark Green Transmission Distance: 3.8
PLA Smart Recycled Green Transmission Distance: 6.5
PLA Smart Recycled White Transmission Distance: 5.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.68mm) swap to Dark Green
At layer #16 (1.4mm) swap to Green
At layer #25 (2.12mm) swap to White for the rest.