Universal Intercom Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Audio
- License
- Standard Digital File License
Required parts
The bolt / handle is not a 3D model, and is not included for part strength reasons. you need to order the handle separately, which is this one for USA: https://www.xump.com/science/quick-release-plastic-c-clamp-2.cfm
and this one for EU:
If you want to buy the complete clamp from my business, you can do that on my Etsy with worldwide shipping: https://www.etsy.com/nl/listing/1737888450/av-comms-holder-and-clamp-for-greengo
Print settings
Best is to print it in PETG, so it will withstand heat in a car for example. printing with a brim is recommended. I recommend printing it with 8 walls or more because it takes a lot of forces at the corners.
Description
Universal intercom beltpack holder, the solid solution against your beltpack and headset lying around and taking precious desk space. Hook it onto a flightcase handle, flipped or not. clamp it onto a table or hook it behind an edge. hang the headset over the beltpack, and even flip the handle 90 degrees for clearance for your legs under a table. Suitable for all AV Beltpacks with a belt clip. Suitable for:
- ClearCom Freespeak and partyline
- GreenGo BPX and WBPX
- Riedel Bolero
- Hollyland Solidcom
- RTS, ASL, PunQtum and many more...
- Every beltpack with a beltclip up to 12mm(0.45") thick and up to 54mm(2.1") wide.
The maximum thickness of a table or table leg is 7cm(2,75") to be able to on clamp it. The hook on top of the holder is used to hang it onto a flightcase handle with the maximum thickness of 15mm. The notch on the top part where you can hook it behind an edge is 20mm wide, and will work perfectly on a tongue and groove of a flightcase or for example a wooden board.