1 / 2
Canon AF35M Film Door Repair Latch — image 1
1 / 2

Canon AF35M Film Door Repair Latch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a repair kit to fix the broken film door latch on your Canon AF35M

Rating
0 / 5
Likes
4
Downloads
105
Makes
0
Views
843
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

When I got my Canon AF35M the film door wouldn't open due to a bent hook.

I redesigned it in order to be strong enough when 3D printed so you need to print 2 parts. I also added a latch with the original dimensions if you want to try if it works for you.

 

To install it you need to unscrew three screws on the back and one on the bottom (in the battery compartment) and pull the back cover away.

The switch is held in by two small press-fit plastic pins, you can simply pull them out.

They won't hold as good when you put them back in but I didn't bother glueing them in as the back cover also holds them in place.

 

If your film door ist stuck like mine you can pull away the rubber grippy part on the right site (when viewed from the back) a little and unscrew the three screws and take the whole door out.

 

As far as I'm aware there are two different latch designs on this camera, one made of two parts and one where both are combined.

I think you can also replace your one part latch with this but you will need to try it yourself.

 

I printed mine in ASA.

 

This is kind of a prototype, you might need to sand the parts a little to fit.

 

Feel free to contact me if you're having problems getting yours to work.