1 / 2
Annex K3 Beacon Nozzle Wiper Bambulab Wiper — image 1
1 / 2

Annex K3 Beacon Nozzle Wiper Bambulab Wiper

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A alternative to the stock silicone wiper using the Bambulab wiper for X1 and P1 series.

Rating
0 / 5
Likes
7
Downloads
48
Makes
0
Views
592
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Why?

I wasn't satisfied with the stock silicone rubber being used to wipe the nozzle, so i made a slight modification to the already existing beacon version of the wiper. So you can't use this with quickdraw. Or any magnetic probe, this is mainly for the beacon probe. 

Uhh what do I buy?

This mod is meant to be used with these wipers made by Bambulab. 
https://store.bambulab.com/products/nozzle-wiper

Me no money : (

Aww man, well I've got something for you. You can also print the wiper! Just print Bambu Nozzle Wiper Printable.stl and use a 11/12mm (just cut it to the length when you've printed it) long 4mm OD 2mm ID PTFE tube. 

Bambulab recommends PP as material, but that isn't the easiest to print so I recommend either PETG or ABS/ASA. No supports needed.
 

But uhm, what do I print?

Good question. You can print the file here on printables and print the rest here:
https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/tree/main/Printers/K3/chkockle-Nozzle_Wiper_Beacon/STLs
except Nozzle_Wiper_Arm_Beacon.stl because that's what you'll be downloading from here. 

Assembly

The assembly is pretty self explanatory. If you look at the provided pictures (or even the CAD😲) I think you'll be able to assemble them even in your dreams. 

One thing, for my setup I had to flip the bolt holding the PTFE in place for it not to collide with the bed. You might not have to, but I did.

Any config changes?

I did have to change the wiper position, but my printer is… strange. So your mileage may vary. But I'm sure you'll be able to figure it out :p. 

I, I, I don't get it…

Uh oh. I'll be here to help. Just ping me in the ANNEX Engineering discord: https://discord.com/invite/MzTR3zE

This mod follows Annex's license agreement: https://github.com/Annex-Engineering/ANNEX-Engineering-License-Agreement

 

Tags