Surprised Squirrel (Hueforge)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Hueforge print of a photo I took of a very surprised-looking squirrel
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I do wildlife photography as a hobby. A few years ago, I was leaving my house for work when I spotted this squirrel sitting in a tree in my front yard. I kept my camera with its telephoto lens sitting by the front door, so I grabbed it and took this picture from my front porch. I ended up submitting this picture to the yearly Washington Post squirrel photography contest, but it sadly didn't win.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x131.46mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Natural Transmission Distance: 21
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #12 (1.04mm) swap to Natural
At layer #17 (1.44mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.