always creepin' hue forge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a design from a great company called Savage Tactiacians.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ALWAYSCREEPIN-HUEFORGE.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x188.18mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to BambuLab Green
At layer #13 (1.12mm) swap to Ash Gray
At layer #21 (1.76mm) swap to Jade White for the rest.