Ender 5 S1 Electronics Skirt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified electronics enclosure skirt from the Mercury One.1 project to work with the Ender 5 S1
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 205
- Makes
- 0
- Views
- 1,317
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
for the front and back sides of the machine:
print 2 each of e5s1-skirt-right_x2.stl and e5s1-skirt-left_x2.stl. They go on the front and rear of the machine.
for the left and right sides of the machine:
e5s1-skirt-power-switch_x1.stl was drawn to put the power plug / switch on the back of the left side of the machine and uses the same screws to self-tap the hole. They printed fine for self tapping without needing to use any heat on my mostly-well tuned machine but YMMV. You should also print 1 of the SK-310-Left_x1.stl file and 2 of the SK-310-Right_x2.stl file. If you want the power switch to be on the back right side of the machine just mirror the e5s1-skirt-power-switch_x1.stl file and print 2 and 1 of the left and right files instead of 1 and 2.
for the centers:
print either 4 of SK_CenterLogo_Inlay_x4.stl OR 4 of SK_Center_Logo_x4.stl depending on which you like the looks of.
For the corners:
print 4 of the SK_FT_38mm_x4.stl file.